The Ronkonkoma K
Page 4
|
Measuring the brake drum with calipers. The driver rear was 11.005", the driver front was 11.020", the passenger rear was 11.015" and the passenger front was 11.035" |
| Starting to measure and clean the brake drums.
Here is a rear drum before attacking with the wire brush
Click pictures to enlarge |
|
|
The brake drum after wire brushing, ready for paint. |
| I used Eastwood chassis black satin. |
|
|
The rear brake drum with right hand thread studs. |
|
The rear brake drum with left hand thread studs.
You can see "L" stamped on the ends, but also note the color. |
|
|
I don't recall seeing lug studs with red color before..... bronze plating? |
| By comparison, the right hand thread studs are steel |
|
A collection of front and rear bumper light housings, and license plate housing light. |
|
|
Back up light housings.
I use "reflective aluminum" paint to increase illumination. |
| I use "detail gray" on the rest of the housing. |
|
To Page 5
Back