I bought new dome light lenses. You can get them on Ebay from vendors such as Van's or Firestone Collectibles. They all sell the same thing. They are about $45/each and look nice but you won't be able to install them. On one end of the lens you have a tab to fit the light housing. On the other end you have a pin. The pin is not long enough. In my first attempt to install, I used RTV on the pin and tired to glue the lens in the housing. It doesn't work. My second idea was better: cut the sides of the lens down so the pin sits higher. You can't see the sides after installation and the pin is now long enough to grab the housing.